Original Research

Original Research articles report on primary and unpublished studies. Original Research may also encompass confirming studies and disconfirming results which allow hypothesis elimination, reformulation and/or report on the non-reproducibility of previously published results. Original Research articles are peer-reviewed, have a maximum word count of 12,000 and may contain no more than 15 Figures/Tables. Authors are required to pay a fee (A-type article) to publish an Original Research article. Original Research articles should have the following format: 1) Abstract, 2) Introduction, 3) Materials and Methods, 4) Results, 5) Discussion.

Systematic Review

Systematic Review articles present a synthesis of previous research, and use clearly defined methods to identify, categorize, analyze and report aggregated evidence on a specific topic. Included in this article type are meta-syntheses, meta-analyses, mapping reviews, scoping reviews, systematic reviews, and systematic reviews with a meta-analysis. Systematic Review articles are peer-reviewed, have a maximum word count of 12,000 and may contain no more than 15 Figures/Tables. Authors are required to pay a fee (A-type article) to publish a Systematic Review article. Systematic Reviews should: clearly define the research question in terms of population, interventions, comparators, outcomes and study designs (PICOS), and state which reporting guidelines were used in the study. For design and reporting, systematic reviews must conform to the reporting guidelines (e.g., PRISMA, Cochrane, Campbell), and include the PRISMA flow diagram http://prisma-statement.org/prismastatement/flowdiagram.aspx (if applicable), as well as funding information (if no specific funding to carry out the research, please state so). Systematic Reviews should have the following format: 1) Abstract, 2) Introduction, 3) Methods (including study design; participants; interventions; comparators; systematic review protocol; search strategy; data sources; study sections and data extraction; data analysis), 4) Results (including a flow diagram of the studies retrieved for the review; study selection and characteristics; synthesized findings; assessment of risk of bias), 5) Discussion (including summary of main findings; limitations; conclusions). Systematic Reviews must not include unpublished material (unpublished/original data, submitted manuscripts, or personal communications) and may be rejected in review or reclassified, at a significant delay, if found to include such content.

Methods

Methods articles present either a new or established method, protocol, or technique that is of significant interest in the field. Methods articles are peer-reviewed, have a maximum word count of 12,000 and may contain no more than 15 Figures/Tables. Authors are required to pay a fee (A-type article) to publish a Methods article. Method articles should have the following format: 1) Abstract, 2) Introduction (outlining the protocol and its possible applications), 3) Materials and Equipment (including a list of reagents/ materials and/or equipment required; formulation of any solutions where applicable), 4) Methods (including objectives and validation of the method; step-by-step procedures; timing of each step or related series of steps; pause points; example(s) of application and effectiveness; details of precision/ accuracy and limits of detection or quantification, where applicable) , 5) (Anticipated) Results (describing and illustrating with figures, where possible, the expected outcome of the protocol; advantages, limitations, possible pitfalls and artifacts and any troubleshooting measures to counteract them), 6) Discussion. Any analytical methods applied to the data generated by the protocol must be referenced or described. Results must be replicable.

Review

Review articles cover topics that have seen significant development or progress in recent years, with comprehensive depth and a balanced perspective. Reviews should present a complete overview of the state of the art (and should not merely summarize the literature), as well as discuss the following: 1) Different schools of thought or controversies, 2) Fundamental concepts, issues, and problems, 3) Current research gaps, 4) Potential developments in the field. Review articles are peer-reviewed, have a maximum word count of 12,000 and may contain no more than 15 Figures/Tables. Authors are required to pay a fee (A-type article) to publish a Review article. Review articles should have the following format: 1) Abstract, 2) Introduction, 3) Subsections relevant for the subject, 4) Discussion. Review articles must not include unpublished material (unpublished/original data, submitted manuscripts, or personal communications) and may be rejected in review or reclassified, at a significant delay, if found to include such content.

Mini Review

Mini Review articles cover focused aspects of a current area of investigation and its recent developments. They offer a succinct and clear summary of the topic, allowing readers to get up-to-date on new developments and/or emerging concepts, as well as discuss the following: 1) Different schools of thought or controversies, 2) Current research gaps, 3) Potential future developments in the field. Mini Reviews articles are peer-reviewed, have a maximum word count of 3,000 and may contain no more than 2 Figures/Tables. Authors are required to pay a fee (B-type article) to publish a Mini Review article. Mini Review articles should have the following format: 1) Abstract, 2) Introduction, 3) Subsections relevant for the subject, 4) Discussion. Mini Review articles must not include unpublished material (unpublished/original data, submitted manuscripts, or personal communications) and may be rejected or reclassified, at a significant delay, if found to include such content.

Policy and Practice Reviews

Policy & Practice Reviews provide a comprehensive coverage and balanced overview of current and relevant topics related to policy, regulations, and guidelines that may be coming from academia, relevant societies, regulatory bodies, industries and others. In contrast to Policy Briefs, this article type provides authors with more space to elaborate on policies and/or guidelines. Policy & Practice Reviews are peer-reviewed, have a maximum word count of 12,000 and may contain no more than 15 Figures/Tables. Authors are required to pay a fee (A-type article) to publish a Policy & Practice Review. Policy & Practice Reviews should have the following format: 1) Abstract, 2) Introduction, 3) Sections on assessment of policy/guidelines options and implications, 4) Actionable Recommendations, 5) Discussion.

Hypothesis and Theory

Hypothesis and Theory articles present a novel argument, interpretation or model intended to introduce a new hypothesis or theory. They should provide the following: 1) New interpretation of recent data or findings in a specific area of investigation, 2) Accurate presentation of previously posed hypotheses or theories, 3) Hypothesis presented should be testable in the framework of current knowledge, 4) May include original data as well as personal insights and opinions. Hypothesis and Theory articles are peer-reviewed, have a maximum word count of 12,000 and may contain no more than 15 Figures/Tables. Authors are required to pay a fee (A-type article) to publish a Hypothesis and Theory article. Hypothesis and Theory articles should have the following format: 1) Abstract, 2) Introduction, 3) Subsections relevant for the subject, 4) Discussion.

Perspective

Perspective articles present a viewpoint on a specific area of investigation. They should provide the following: 1) Discuss current advances and future directions, 2) Clear presentation of the authors’ perspective, 3) Accurate presentation and citations of other authors’ work, 4) May include original data as well as personal insights and opinions. Perspective articles are peer-reviewed, have a maximum word count of 3,000 and may contain no more than 2 Figures/Tables. Authors are required to pay a fee (B-type article) to publish a Perspective article. Perspective articles should have the following format: 1) Abstract, 2) Introduction, 3) Subsections relevant for the subject, 4) Discussion.

Clinical Trial

Clinical Trial articles describe the results of interventional studies related to health. These articles can include pilot studies, safety and efficacy trials, surrogate endpoint studies, and proof-of concept studies. Clinical Trial articles are peer-reviewed, have a maximum word count of 12,000 and may contain no more than 15 Figures/Tables. Authors are required to pay a fee (A-type article) to publish a Clinical Trial article. Clinical Trial articles should have the following format: 1) Abstract (please include the clinical trial registry number), 2) Introduction, 3) Materials and Methods (including flow diagram when applicable, for example the CONSORT FLOW DIAGRAM- http://www.consort-statement.org/consort-statement/flow-diagram), 4) Results, 5) Discussion. All clinical trials must be registered in a public trials registry to be considered for publication, and authors should be compliant with the Consolidated Standards of Reporting Trials (CONSORT).

Case Report

Case Reports highlight unique cases of human or animal patients that present with an unexpected/ diagnosis, treatment outcome, or clinical course. Case Reports are peer-reviewed, have a maximum word count of 3,000 and may contain no more than 4 display items (figures, tables, or videos). Authors are required to pay a fee (B-type article) to publish a Case Report article. Authors should follow the CARE guidelines and submit a completed CARE checklist as a supplementary file (template available here: https://www.care-statement.org/checklist).

Case Reports should have the following format: 1) Abstract, 2) Introduction: including what is unique about the case and medical literature references, 3) Case description: including de-identified patient information, relevant physical examination and other clinical findings, relevant past interventions and their outcomes, 4) A figure or table showcasing a timeline with relevant data from the episode of care, 5) Diagnostic assessment, details on the therapeutic intervention, follow-up and outcomes, as specified in the CARE guidelines, 6) Discussion: strengths and limitations of the approach to the case, discussion of the relevant medical literature (similar and contrasting cases), take-away lessons from the case, 7) Patient perspective. Authors are required to obtain written informed consent from the patients (or their legal representatives) for the publication. Only Case Reports that are original and significantly advance the field will be considered. All Case Reports should carry the title “Case Report: ‘area of focus’”. More information on CARE guidelines here: https://www.care-statement.org/

Curriculum, Instruction, and Pedagogy

Curriculum, Instruction, and Pedagogy (CIP) articles describe innovative curricula, courses, teaching methodologies, teaching formats, educational training programs, pedagogical frameworks such as competency models, evaluation techniques, instructions on data analysis or data collection methods, and other innovative pedagogical elements. CIP articles may also be aimed at graduate students, faculty seeking additional instructional resources, or professional development staff seeking to help practicing teachers into a new procedure. Curriculum, Instruction, and Pedagogy articles are peer-reviewed, have a maximum word count of 5,000 and may contain no more than 5 Figures/Tables. Authors are required to pay a fee (B-type article) to publish a Curriculum, Instruction, and Pedagogy article. Curriculum, Instruction, and Pedagogy articles should have the following format: 1) Abstract, 2) Introduction: Background and rationale for the educational activity innovation, 3) Pedagogical framework(s), pedagogical principles, competencies/standards underlying the educational activity, 4) Learning environment (setting, students, faculty); learning objectives; pedagogical format, 5) Results to date/assessment (processes and tools; data planned or already gathered), 6) Discussion on the practical implications, objectives and lessons learned, 7) Acknowledgment of any conceptual, methodological, environmental, or material constraints. Information should be presented in sufficient detail to enable readers to replicate key elements for their own context.

General Commentary

General Commentary articles provide critical comments on a previous publication at Frontiers. Authors wishing to submit commentaries on articles published outside of Frontiers are encouraged to reformat and submit them as an Opinion type. General Commentary articles are peer-reviewed, have a maximum word count of 1,000 words and may contain no more than 1 Figure/Table. They should not contain unpublished or original data. General Commentary articles must be submitted for consideration to the same Journal and Specialty as the original article. Authors are required to pay a fee (C-type article) to publish a General Commentary article. General Commentary articles should have the following format: 1) Title: “Commentary: Title of the original article” (mandatory), 2) Introduction, 3) Subsections relevant for the subject, 4) Discussion. At the beginning of your General Commentary, please provide the complete citation of the article being commented on.

Opinion

Opinion articles allow authors to contribute viewpoints on the interpretation of recent findings in any research area, value of the methods used, as well as weaknesses and strengths of scientific hypotheses. They should abide to the following guidelines: not contain unpublished or original data, be supported by evidence, be fully referenced, encourage constructive discussion, refrain from emotionally-charged argumentation. Opinion articles are peer-reviewed and have a maximum word count of 2,000 and may contain no more than 1 Figure/Table. Authors are required to pay a fee (C-type article) to publish an Opinion article. Opinion articles should have the following format: 1) Introduction, 2) Subsections relevant for the subject, 3) Discussion.

Correction

Corrigendum/Addendum: should authors notice errors that affect the scholarly record or the integrity of the paper, authors are encouraged to submit a correction online. The correction must detail the reason(s) for the error(s) and include only the elements (e.g. sections, sentence, figure) of the manuscript being revised or corrected. All authors of the original paper need to agree to the request for changes. The contribution to the field statement should be used to clearly state the reason for the Correction. Depending on the extent of the correction required, corrections may require peer review. Authors are informed that requests for changes beyond that described here may not be accepted for publication.

Erratum: should authors notice differences between their approved galley proofs and the final published article, thus leading to errors that affect the scholarly record or the integrity of the paper, authors are encouraged to submit a request for erratum to the Frontiers Production Office (production.office@frontiersin.org), clearly specifying the error and the correct information.

Editorial

Editorials are submitted exclusively by the host editor(s) of a Frontiers Research Topic, to convey to the reader the aims and objectives of the research that pertains to the topic, as well as placing it in a broader context. The Editorial should present the contributing articles of the Research Topic but should not be a mere table of contents. As the final contributing article to the Research Topic, Editorials should be submitted once all expected articles have been accepted and published. Editorials should not include unpublished or original data and the inclusion of references is strongly encouraged. Editorial articles may contain 1 Figure and have a word count of 1,000 for Topics with 5-10 articles. The word limit can be increased for each additional article in the Topic, up to a maximum of 5,000 words for 50 articles or more. Topic editors are not required to pay a fee to publish an Editorial article. Submissions are required to have the title Editorial: "Title of Research Topic".

Addendum

Addenda are additions to papers that provide the necessary information for correct scientific interpretation of the data or to ensure experimental reproducibility. Addendum is only applicable to article types containing primary research data. The addendum itself must not contain new data. Authors are requested to submit a request for addendum to the journal online. Authors are informed that requests for additions beyond what has been described here may not be accepted for publication. Authors are not required to pay a fee to publish an addendum.

Technology and Code

Technology & Code articles present new technology, code and/or software or a new application of a known technology or software. This article type aims to open new avenues for theoretical and experimental investigation, data analysis or data reduction within the field of study. Technology & Code articles can also feature studies that implement existing algorithms under novel settings. Technology & Code articles are peer-reviewed, have a maximum word count of 12,000 and may contain no more than 15 Figures/Tables. Authors are required to pay a fee (A-type article) to publish Technology & Code article. Technology & Code articles related to innovative software solutions and/or design should be novel, presented in a well-documented, human-readable format and should be placed online in a repository, with an associated DOI/URI for retrieval. To better support the code documentation, authors can also upload a metadata file in different formats (i.e. JSON-LD, Microdata, RDFa) that incorporates all the relevant information. Authors can refer to the schema.org vocabulary, and to the SoftwareApplication/SoftwareSourceCode and Dataset related specifications. Technology & Code articles should have the following format: 1) Abstract, 2) Introduction, 3) Method (including any code description), 4) Results (including examples of use and limitations), 5) Discussion (including scalability and limitations). The following information must also be included: project link (e.g. sourceforge, github), operating system (e.g. Windows, Linux, platform independent), programming language (e.g. Python), any restrictions for non-academic use (e.g. licence needed).

Study Protocol

Study Protocol articles document the design of prospective research and it is intended to facilitate dissemination of ongoing studies and promote transparency. Study Protocol articles are peer-reviewed, have a maximum word count of 12,000 and may include up to 15 Figures/Tables. Authors are required to pay a fee (A-type article) to publish a Study Protocol article. Study Protocol articles should have the following format: 1) Abstract (please include the clinical trial registry number for clinical studies), 2) Introduction, 3) Methods and Analysis (including design; selection/treatment of subjects; interventional methods; data analysis), 4) Discussion, 5) Ethics and Dissemination. For clinical studies, registration in a public clinical trial registry is mandatory prior to the submission of the manuscript and the authors are strongly encouraged to follow the SPIRIT guidelines (http://www.spirit-statement.org/) and checklist. Study Protocols are not considered if other articles relating to the study are already published or in review, if it reports any research data from the study, or for any pilot or feasibility study.