Original Research
Published on 01 Jul 2021
Computational Design of Sensitized Combustion Chemistry Experiments
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2021.705586
- 4,665 views
- 1 citation
Type at least 3 characters
131 articles
Articles
Original Research
Published on 16 Jun 2021
Axial Turbo-Expander Design for Organic Rankine Cycle Waste-Heat Recovery With Comparative Heavy-Duty Diesel Engine Drive-Cycle Performance Assessment
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2021.676566
- 7,671 views
- 3 citations
Review
Published on 01 Jun 2021
Micro Gas Turbines in the Future Smart Energy System: Fleet Monitoring, Diagnostics, and System Level Requirements
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2021.676853
- 12,294 views
- 16 citations
Methods
Published on 17 May 2021
Use of an Under-Water Compressed Air Energy Storage (UWCAES) to Fully Power the Sicily Region (Italy) With Renewable Energy: A Case Study
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2021.641995
- 11,967 views
- 22 citations
Original Research
Published on 11 May 2021
A Specifically Designed Injector for Controlled Lube Oil Addition in View of Investigation of Pre-Ignition Phenomena in Dual–Fuel/Gas Engines
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2021.623896
- 2,696 views
- 1 citation
Editorial
Published on 27 Apr 2021
Editorial: Design and Application of Novel Combustion Systems for Internal Combustion Engines
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2021.676196
- 2,467 views
- 2 citations
Original Research
Published on 15 Apr 2021
Sensor System and Observer Algorithm Co-Design For Modern Internal Combustion Engine Air Management Based on H2 Optimization
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2021.611992
- 3,707 views
- 2 citations
Original Research
Published on 12 Apr 2021
Influence of the Prosumer Allocation and Heat Production on a District Heating Network
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2021.623932
- 3,664 views
- 3 citations
Original Research
Published on 26 Mar 2021
Utilizing One-Way Valve to Optimize Turbocharger Performance on a Blended EGR Engine
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2021.601397
- 3,771 views
- 2 citations
Original Research
Published on 25 Mar 2021
Impact of Active Control Turbocharging on the Fuel Economy and Emissions of a Light-Duty Reactivity Controlled Compression Ignition Engine: A Simulation Study
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2021.610891
- 5,232 views
- 4 citations
Original Research
Published on 18 Mar 2021
A System to Enable Mixing Controlled Combustion With High Octane Fuels Using a Prechamber and High-Pressure Direct Injector
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2021.637665
- 7,408 views
- 20 citations
Original Research
Published on 11 Mar 2021
Tailored Air-Handling System Development for Gasoline Compression Ignition in a Heavy-Duty Diesel Engine
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2021.611916
- 2,681 views
- 7 citations
Original Research
Published on 08 Mar 2021
Ignition Process and Flame Lift-Off Characteristics of dimethyl ether (DME) Reacting Spray
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2021.547204
- 4,110 views
- 7 citations
Original Research
Published on 26 Feb 2021
Novel High-Speed Turbo Compressor With Integrated Inverter for Fuel Cell Air Supply
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2020.612301
- 9,136 views
- 10 citations
Original Research
Published on 22 Feb 2021
Crank-Angle Resolved Flow Measurements in the Intake Duct of a Research Engine Using Novel and Fast Response Aerodynamic Probes
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2021.633690
- 3,654 views
- 1 citation
Original Research
Published on 15 Feb 2021
The Influence of Charge Motion on Pre-Chamber and Main Chamber Combustion in a Highly Dilute Jet Ignition Engine
in Engine and Automotive Engineering
Frontiers in Mechanical Engineering
doi 10.3389/fmech.2020.629243
- 6,288 views
- 13 citations