Original Research

Published on 15 Jun 2023

Synthesis of graphene oxide (GO) and reduced graphene oxide (rGO) and their application as nano-fillers to improve the physical and mechanical properties of medium density fiberboard

in Polymeric and Composite Materials

Waheed Gul
Syed Riaz Akbar Shah
Afzal Khan
Naveed Ahmad
Sheraz Ahmed
Noor Ain
Arshad Mehmood
Bashir Salah
Syed Sajid Ullah
Razaullah Khan

Frontiers in Materials

doi 10.3389/fmats.2023.1206918

7,854 views
16 citations

Original Research

Published on 14 Jun 2023

Effect of shear ratio on rheological properties of suspension in two-step flocculation process for fine iron tailings

in Polymeric and Composite Materials

Ying Yang
Aixiang Wu
Xiancheng Wang
Guoli Wang

Frontiers in Materials

doi 10.3389/fmats.2023.1217947

2,703 views

Original Research

Published on 13 Jun 2023

Synthesis of novel Fe3O4 nanostructures surrounded by Ti-MOF nanostructures as bioactive and efficient catalysts in three-component synthesis of new pyrazole derivatives

in Polymeric and Composite Materials

Balsam Qubais Saeed
Ibrahem Waleed
Hussein Humedy Chlib Alkaaby
Sabrean Farhan Jawad
Usama S. Altimari
Ziyad Shihab Ahmed AL-Sarraj
Ruwaida T. Shbeeb
Salema K. Hadrawi
Muath Suliman
Mohammad Y. Alshahrani

Frontiers in Materials

doi 10.3389/fmats.2023.1156702

1,363 views
5 citations

Editorial

Published on 13 Jun 2023

Editorial: Additive manufacturing for polymers

in Polymeric and Composite Materials

Xuan Zhou
Jianlei Wang

Frontiers in Materials

doi 10.3389/fmats.2023.1230323

922 views

Original Research

Published on 12 Jun 2023

Unified numerical process modeling of forming and consolidation for thermoplastic composites with prepreg patches

in Polymeric and Composite Materials

P. D. Mulye
L. Morançay
C. Binetruy
S. Comas-Cardona
A. Leygue
D. Guillon

Frontiers in Materials

doi 10.3389/fmats.2023.1176482

2,300 views

Original Research

Published on 07 Jun 2023

Cement–ash concrete with the addition of lime kiln dust

in Polymeric and Composite Materials

Leonid Dvorkin
Vadim Zhitkovsky

Frontiers in Materials

doi 10.3389/fmats.2023.1196407

3,233 views
2 citations

Review

Published on 02 Jun 2023

The effect of size, morphology and surface properties of mesoporous silica nanoparticles on pharmacokinetic aspects and potential toxicity concerns

in Polymeric and Composite Materials

Uranous Niroumand
Negar Firouzabadi
Ghazal Goshtasbi
Bahareh Hassani
Parisa Ghasemiyeh
Soliman Mohammadi-Samani

Frontiers in Materials

doi 10.3389/fmats.2023.1189463

5,121 views
21 citations

Original Research

Published on 02 Jun 2023

Multiscale analyses of the damage of composite rocket motor cases

in Polymeric and Composite Materials

Zai Liu
Weiwei Hui
Guoqing Chen
Peng Cao

Frontiers in Materials

doi 10.3389/fmats.2023.1198493

2,422 views
2 citations

Original Research

Published on 26 May 2023

Additive manufacturing of metal-polymer hybrid parts: the influence of as-printed LPBF surface roughness on the joint strength

in Polymeric and Composite Materials

C. Belei
P. S. Effertz
B. Meier
S. T. Amancio-Filho

Frontiers in Materials

doi 10.3389/fmats.2023.1202281

2,556 views
2 citations

Editorial

Published on 23 May 2023

Editorial: Polymer composites based on nanofillers: design, properties, and applications

in Polymeric and Composite Materials

Lik-ho Tam
Dong-Joo Lee
Vineet Kumar

Frontiers in Materials

doi 10.3389/fmats.2023.1216973

1,448 views
1 citation

Original Research

Published on 11 May 2023

Thermal performance of thermoplastic polyurethane composites with microencapsulated piperazine pyrophosphate

in Polymeric and Composite Materials

Shuang Hu
Jianwen Peng
Jianjun Tian
Chong Xiao

Frontiers in Materials

doi 10.3389/fmats.2023.1178475

1,697 views
3 citations

Original Research

Published on 11 May 2023

Evaluating the performance of surfactant and charcoal-based cleaning products to effectively remove PAHs from firefighter gear

in Polymeric and Composite Materials

MD Tanjim Hossain
Arjunsing G. Girase
R. Bryan Ormond

Frontiers in Materials

doi 10.3389/fmats.2023.1142777

3,091 views
3 citations

Original Research

Published on 09 May 2023

Impact of moisture content, closing speed, and pressurizing speed on the performance of medium density fiberboard (MDF)

in Polymeric and Composite Materials

Waheed Gul
Naveed Ahmad
Shoaib Mohammad
Bashir Salah
Syed Sajid Ullah
Muhammad Khurram
Razaullah Khan

Frontiers in Materials

doi 10.3389/fmats.2023.1195789

3,008 views
2 citations

Original Research

Published on 09 May 2023

g-C3N4/Fe3O4 composites synthesized via solid-state reaction and photocatalytic activity evaluation of methyl blue degradation under visible light irradiation

in Polymeric and Composite Materials

Asghar Ali
Muhammad Amin
Muhammad Tahir
S. S. Ali
Asif Hussain
Imtiaz Ahmad
Asif Mahmood
M. Umer Farooq
Muhammad Asim Farid

Frontiers in Materials

doi 10.3389/fmats.2023.1180646

2,952 views
6 citations

Original Research

Published on 05 May 2023

Modeling the contact dispensing process of conductive adhesives with different viscosities and optimization of droplet deposition

in Polymeric and Composite Materials

Jiajia Zou
Mengqiu Huang
Dan Zhao
Fang Chen
Daochang Wang

Frontiers in Materials

doi 10.3389/fmats.2023.1183747

2,744 views
1 citation

Original Research

Published on 04 May 2023

Comprehensive computational investigations on various aerospace materials under complicated loading conditions through conventional and advanced analyses: a verified examination

in Polymeric and Composite Materials

Raj Kumar Gnanasekaran
Balasubramanian Shanmugam
Vijayanandh Raja
Hussein A. Z. Al-Bonsrulah
Parvathy Rajendran
Jeeva Radhakrishnan
Sayed M. Eldin
Venkatesh Narayanan

Frontiers in Materials

doi 10.3389/fmats.2023.1147310

2,735 views
2 citations

Navigation group

Articles

Synthesis of graphene oxide (GO) and reduced graphene oxide (rGO) and their application as nano-fillers to improve the physical and mechanical properties of medium density fiberboard

Effect of shear ratio on rheological properties of suspension in two-step flocculation process for fine iron tailings

Synthesis of novel Fe3O4 nanostructures surrounded by Ti-MOF nanostructures as bioactive and efficient catalysts in three-component synthesis of new pyrazole derivatives

Editorial: Additive manufacturing for polymers

Unified numerical process modeling of forming and consolidation for thermoplastic composites with prepreg patches

Cement–ash concrete with the addition of lime kiln dust

The effect of size, morphology and surface properties of mesoporous silica nanoparticles on pharmacokinetic aspects and potential toxicity concerns

Multiscale analyses of the damage of composite rocket motor cases

Additive manufacturing of metal-polymer hybrid parts: the influence of as-printed LPBF surface roughness on the joint strength

Editorial: Polymer composites based on nanofillers: design, properties, and applications

Thermal performance of thermoplastic polyurethane composites with microencapsulated piperazine pyrophosphate

Evaluating the performance of surfactant and charcoal-based cleaning products to effectively remove PAHs from firefighter gear

Impact of moisture content, closing speed, and pressurizing speed on the performance of medium density fiberboard (MDF)

g-C3N4/Fe3O4 composites synthesized via solid-state reaction and photocatalytic activity evaluation of methyl blue degradation under visible light irradiation

Modeling the contact dispensing process of conductive adhesives with different viscosities and optimization of droplet deposition

Comprehensive computational investigations on various aerospace materials under complicated loading conditions through conventional and advanced analyses: a verified examination